Factory Offer Water Treatment Chemicals Ferric Sulfate Quick
Delivery and High Content
- Ferric sulfate is a high efficient inorganic polymer flocculants,
its chemical general formula is [Fe2(OH)n(SO4)3-n/2]m. The solid is
light yellow amorphous powder, liquid is red brown viscous
transparent liquid. The solid product has strong hygroscopicity.
The condensation performance of this product is good. Stable
chemical property, fast settlement, apply to wide pH range, can be
widely used in the purification treatment of drinking water, all
kinds of industrial water, industrial wastewater and city sewage.
- Ferric sulfate is effective primary inorganic coagulant based on
trivalent iron (Fe3+), the ferric iron iron content is 19-21%
- It is an excellent for drinking water production, wastewater
treatment, phosphorus removal applications, struvite control as
well as sludge conditioning.
- The products are also efficient in preventing odor and corrosion by
controlling the formation of hydrogen sulfide.
- Can be used in discolouring, dehydrating, deodorizing, degreasing,
sterilizing as well as discarding heavy metal iron, radioactive
substance and carcinogens in the water, and eliminate COD,BOD and
- Good effect in purifying the river water with algae, low
temperature and low turbidity, and slightly contaminated and better
effect in purifying the high turbidity river water.
|Appearance:||Powder Light Yellow|
|Fe3+ Content (%):||19 Min.|
|Restore Substances ( Fe2+) Content%:||1.0% Max.|
|PH(1% water solution):||2.0-3.0|
|Insoluble Substances (%):||1.0 Max.|
|Package:||25kgs pp bag with inner pe bag and 25tons in 20' container|
- For different kind of water and wastewater pufirying
- For inorganic sludge dewatering
- Wastewater phosphorus treatment
- Oily wastewater treatment
- Industry waste water treatment (such as the paper making waste
water, the printing wastewater, the massacre waste water, the
automobile manufacturing waste water, the beer factory waste water
and so on).
- Mining water clarifying.
Water purification effect is good, the water quality of yielding
water is good, does not contain harmful materials such as aluminum,
chlorine and heavy metal ions etc. also no iron ion water phase
transfer, non-toxic, harmless, safe and reliable.
Rapid sedimentation and good flocculation
Wide effective PH value and strong applicability comparing with
In industry waste water processing, good decolorization and high
removing effect on COD.
Good coagulation function with thick flocs and fast sedimentation,
excellent purifying effect.
Safe, reliable, nonpoisonous and harmless: doesn’t contain any
harmful substances such as aluminum, chlorine, heavy metal ions,
and water phase transference of iron ions. PH barely changes after
treatment, and has little corrosiveness effect the equipment.
Before the use, the product will be put into the dissolved pool in
a certain concentration of 10%-30%, injection tap water and stir
make it fully dissolved, standing for about 2 hours to a reddish
brown transparent liquid, then add water diluted to the required
concentration and adding coagulation. Water plant can also be
prepared 2%-5% direct adding, processing of industrial waste water
directly adding with 5%-10%.
The amount of dosing can be determined, according to the nature of
raw water by production debugging or beaker experiment and the alum
flowers form, water plant can use the original other medicine dose
as a reference, under the same conditions, the dosage of the
product is roughly same with the solid poly aluminum chloride, is
the 1/3-1/4 dosage of solid aluminum sulfate. If the original is
the use of liquid products, can according to the corresponding
reagent concentration calculation and discretion, roughly according
to weight ratio of 1:3 decide.
When used, pump the prepared solution into the metering tank,
through the metering adding solution and coagulating with raw
In general, on the day of preparation on the day of use, preparing
dosage needs the tap water, slightly sediment is a normal
phenomenon, does not affect the agentia effect.
Keep close attention to the hydraulic conditions and formation
status of alum flowers in the three stages of coagulation process,
timely adjustment the use dosage of agentia to achieve the best
Package and Storage:
The product packed with non-toxic polyethylene plastic bags, plus a
woven bag, net weight is 25 kg per bag.
This product must be stored in a dry, moisture-proof, avoid
hot(<80 ℃), do not damage the packaging, the product can be
stored for a long time. Different manufactures or different brand
of water treatment chemicals should not be mixed use, and should
not mixed and stored with other chemicals. The effective storage
period is 12 months.
The solid product still can be used after be affected with damp.
Bluwat Quaternary Ammonium Cationic Polymer Plant Snapshot:
Bluwat Main Products:
- BWD-01 Water Decoloring Agent , for color removal for textile
dyeing wastewater treatment and for other wastewater .
- Poly Aluminium Chloride(PAC) , for drinking water treatment for
- Polyacrylamide (PAM)/Polyelectrolyte , for water treatment, for
- PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling , for
drilling mud additive in the oilfield.
- Ferric Sulphate , for drinking water and wastewater treatment.
- PolyDADMAC , for water treatment and for paper mills and for
- Polyamine, for drinking and wastewater treatment, sludge
dewatering, paper making and oilfield.
- Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water
treatment and other fields